Our Pine Exterior Plywood is manufactured to AS/NZS 2271 from plantation grown Hoop Pine and Klinki Pine veneers, using an “A” bond, WBP glue.

The product is certified by the Engineered Wood Products Association of Australia (EWPAA) under Certificate #916.

Technical Information

StandardAS/NZS 2271 Exterior Plywood
Sheet DimensionsLength – 2400mm, Width – 1200mm Thickness 4, 6, 9, 12, 15, 17, 19 & 25mm
Veneer GradeAC, BB, BC grades available.
Stress GradeF14
TreatmentACQ H3 and H4 treatment is available.
Timber SpeciesPlantation grown Hoop Pine and Klinki Pine
Density14-20 kg/m2
Moisture Content8% ~12% (despatch)
TolerancesAs per AS/NZS 2269
+/- 4% - sanded sheet over 7.5mm thick up to and including 17.5mm
+/-3% - sanded sheet over 17.5mm thick
GluePhenolic Resin – AS 2754.1
BondType A – AS/NZS 2098.2, E0 formaldehyde emission class
FinishSanded both sides. B faces have minimal filled imperfection. C faces may
have small filled or sanded imperfections.
ColourStraw coloured in raw untreated state.
Edge ProfileSquare Edged
CertificationThird party certification – Engineered Wood Products Association of
Australia (EWPAA) – (Certificate #916)
Warranty40 years against glueline failure when used in correct application.
AdvantagesHigh strength and stiffness to weight ratio; high dimensional stability; high panel shear; chemical resistance.